mongodb_ubuntu

MongoDB

An Ansible role that installs, configures and manages MongoDB for Ubuntu 22.04.

MongoDB for RHEL-like flavors can be found here.

Please read this file carefully before deploying this Ansible role

Functionalities

  • Applies recommended production notes, e.g. numa and disables transparent hugepages
  • Bootstrapping a cluster in a PSA architecture (primary, secondary, arbiter)
    • includes cluster verification
  • Secures connection by encrypting traffic via a keyfile, auto generated
  • Install either Community or the Enterprise edition
  • Easily to configure, with a future proof configuration method
  • Update playbook, supports patch releases
  • Add user defined users
  • Add user defined databases
  • Backup with mongodump
  • Logrotation, set from within mongo

This is role is idempotent and passes ansible-lint checks.
Can be used with Ansible version 2.9 to latest. Might support earlier versions as well.

Requirements

  • Brain
  • On the controller node, ensure the mongodb collection is installed
  • The hosts are able to connect to each other, with preferably hostnames, and the set port, default 27017
  • Keep in mind there is enough disk space for data disk, and the backup if set

Assertions

There are several assertions to ensure a minimal valid configuration. Of course, it does not cover every use case, but most of them. Please follow this readme carefully. As a hint, for valid a configuration, see the variables files in the molecule folder.

Versioning and edition

The version and edition can be set. By default, the official mongodb repository and gpg key are added.

mongo_repo: true
mongo_version: 6.0
mongo_edition: org  # or enterprise

So far, Ubuntu 22.04 only supports MongoDB 6.0, and not lower.

No log

By default, for security reasons, logging for several tasks is turned off. To turn it on:

mongo_no_log: true

Recommendations

This section refers to this official production notes of MongoDB.

This role includes several configuration recommendations, but not all. There is for example: "Turn off atime for the storage volume containing the database files." Such tasks are out of scope for this role.

There are tasks which this role does apply if set, these are:

  • Start MongoDB with numactl, set in systemd file
  • Disabling zone reclaimm
  • Disabling transparent hugepages
  • Configure tuned profile

See tasks/thp.yml and tasks/numa.yml for the actual changes to the system.

These configuration recommendations are applied by default.

mongo_thp: true
mongo_numa: true

Configuration variables

First, see defaults/main.yml.

The configuration file is placed at /etc/mongod.conf.

The values set in the Ansible configuration are set exactly to the configuration file on the host. Only the keys are pre-defined. Example:

# Variable set in Ansible configuration
mongo_operationprofiling:
  my_Value:
    anotherValue: something

Will result in the configuration file on disk:

operationProfiling:
  my_Value:
    anotherValue: something

If the key is set to an empty string, it will be commented out on the configuration file on disk.

The possible keys to set are:

mongo_systemlog
mongo_storage
mongo_processmanagement
mongo_security
mongo_operationprofiling
mongo_replication
mongo_sharding
mongo_auditlog
mongo_snmp

There are pre-defined values, which are default for Mongo. If for some reason, it is desired to set custom key/values, use:

mongo_custom_cnf:
  my_key:
    my_value: true

Authorization

By design there are 3 users created: admin, backup and adminuser. The admin has role root, the backup user has role backup and adminuser has role userAdminAnyDatabase.

mongo_admin_pass: 'change_me'
mongo_adminuser_name: adminuser
mongo_adminuser_pass: 'change_me'

Databases and users

Taken from the docs, define your own set of users/databases.

See the docs for the possible roles.

Users and databases are always configured via localhost, via user admin and database admin. When a cluster configured, configuring database and users is executed from the primary host.

Set with:

mongo_user:
# in it's most simple form
  - database: my_db
    name: my_user

# standard values
  - database: another_db
    name: another_user
    update_password: on_create
    password: "123ABC!PASSWORD_XYZ"
    roles: 'readWrite,dbAdmin,userAdmin'
    state: present

# all possible variables
  - database: my_db
    name: someone
    password: my_password
    update_password: on_create             # default always
    roles: 'readWrite,dbAdmin,userAdmin'   # default omitted
    state: absent                          # default present
    ssl: true                              # default omitted
    ssl_ca_certs: /path/to/ca_certs        # default omitted
    ssl_cert_reqs: CERT_REQUIRED           # default omitted
    ssl_certfile: /path/to/ssl_certfile    # default omitted
    ssl_crlfile: /path/to/ssl_crlfile      # default omitted
    ssl_keyfile: /path/to/ssl_keyfile      # default omitted
    ssl_pem_passphrase: 'something'        # default omitted
    auth_mechanism: PLAIN                  # default omitted
    connection_options: my_conn_options    # default omitted
    create_for_localhost_exception: value  # default omitted

To keep the role idempotent, you should set the value for update_password to on_create. Only when actually updating a password, set it to always, then switch back to on_create.

Clustering

When there are multiple hosts in the play, Ansible assumes clustering is configured.

Clustering in a PSA (primary/secondary/arbiter) architecture is possible, or a primary/secondary/secondary setup.

For security reasons, the connection between the hosts is secured with a keyfile.

The keyfile is automatically generated and deemed secure.

mongo_security:
  keyFile: /etc/keyfile_mongo

A 2 host cluster is a fundamentally broken design, as it cannot maintain uptime without a quorum and the ability of a node to go down to aid recovery. When there are exactly 2 hosts in the play, forming a cluster is not possible. Mongo will not cluster, because there must be a valid number of replicaset members.

There are assertions in place to verify whether an uneven amount of hosts are the play.

Configure with:

# set the role per host. in the host_vars
mongo_replication_role: primary # or secondary, or arbiter

# in group_vars/all.yml
mongo_replication:
  replSetName: something
mongo_security:
  keyFile: /etc/keyfile_mongo

There can be only 1 primary and 1 arbiter set.

You shouldn't change the design of the cluster once it has been deployed, e.g. change a secondary to an arbiter.

Arbiter

As per the docs, avoid deploying more than one arbiter per replica set.

Ansible will take care of adding the arbiter properly to the cluster.

mongo_replication_role: arbiter

Backup

The back-up is configured to be set on either on a single host without replication, or on the first secondary host in the play. It is performed with mongodump, set in cron.

The backup scripts are only placed on the first applicable secondary node:

- host1 [primary]   <-- backup scripts absent here
- host2 [secondary] <-- backup scripts placed here
- host3 [secondary] <-- backup scripts absent here
mongo_backup:
  enabled: true
  dbs:
    - admin
    - config
    - local
  user: backup
  pass: change_me
  path: /var/lib/mongo_backups
  owner: mongodb
  group: mongodb
  mode: '0660'
  hour: 2
  minute: 5
  day: "*"
  retention: 46  # in hours

Ensure to change the password of the backup user, and allow the backup user to actually backup a given database.

On disk, the result will be:

[root@test-multi-03 mongo_backups]# pwd ; ls -larth
/var/lib/mongo_backups
total 4.0K
drwxr-xr-x. 36 root   root   4.0K Jan 20 12:33 ..
lrwxrwxrwx   1 root   root     46 Nov 20 12:37 latest -> /var/lib/mongo_backups/mongo_backup_2021-11-20
drw-rw----   3 mongod mongod   51 Nov 20 12:37 .
drwxr-xr-x   5 root   root     77 Nov 20 12:38 mongo_backup_2021-11-20

Logrotation

Please read the docs. Ensure settings are configured properly.

Updating

Before updating, ensure proper testing is in place. Begin with reading the latest changes in the official docs.

There is a separate update playbook, see playbooks/update.yml. Set the correct hostname in place and simply run the playbook.

Updating can easily be done for patch versions, e.g. from 6.0.1 to 6.0.2. This role does not include major version upgrades due to breaking changes on each release and other obvious reasons.

If this is desired, the logic is in place in the update playbook to actually perform a major upgrade.

New variables can be set when updating mongo. To update:

mongo_state: latest

# setting new variables is possible when updating mongo
mongo_net:
  new_variable: true

While updating, ensure applications don't write to mongo. Also, ensure a backup is created beforehand.

Updating a replica set

If a replication set is active, the cluster should be maintained after the update. As taken from the docs, the following steps are executed:

 - verify cluster health, if ok, continue

 - shutdown mongo application on arbiter if present
 - update mongo on arbiter
 - place config on arbiter
 - start mongo on arbiter

 - wait until cluster health is ok

 - shutdown mongo application on a secondary
 - update mongo on secondary
 - place config on secondary
 - start mongo on secondary

 - wait until cluster health is ok

 - repeat for remaining secondaries

 - step down primary
 - update mongo on original primary
 - place config on original primary
 - start mongo on original primary

 - wait until cluster health is ok

Updating a sharded environment

In development.

Development

  • There is a reset playbook to remove all mongo files. This is useful for development purposes, see tasks/reset.yml. It is commented out by design

Scaling

Still in development... I am not even sure whenever I'll this functionality, since this is currently not even possible with mongo 5.0. It is not easy to configure scaling in mongo with Ansible, since the method is not straight forward.

So far, I saw that the steps should be:

  • If arbiter is present in configuration and on system
    • remove arbiter from cluster
  • Add new secondary or secondaries
  • Add arbiter if configured

I have tried configuring this countless amount of times, but always failed due to a system error. I decided to not include scaling for now.

Example playbook

- hosts:
    - mongo_primary
    - mongo_secondary
    - mongo_arbiter
  roles:
    - ansible_role_mongodb_ubuntu
  any_error_true: true
  vars:
    mongo_restart_config: true
    mongo_restart_seconds: 8
    mongo_thp: true
    mongo_numa: true
    mongo_replication:
      replSetName: replicaset1
    mongo_security:
      authorization: enabled
      keyFile: /etc/keyfile_mongo
    mongo_admin_pass: something
    mongo_adminuser_pass: something
    mongo_net:
      bindIp: 0.0.0.0
      port: 27017
    mongo_systemlog:
      destination: file
      logAppend: true
      path: /opt/somewhere/mongod.log
    mongo_storage:
      dbPath: /opt/mongo/
      journal:
        enabled: true
    mongo_user:
      - database: burgers
        name: bob
        password: 12345
        state: present
        update_password: on_create    
  pre_tasks:
    # ensure this is done
    # - name: ensure hosts can connect to each other via hostnames
    #   template:
    #     src: hosts.j2
    #     dest: /etc/hosts
Install
ansible-galaxy install csuka/ansible_role_mongodb_ubuntu
GitHub repository
License
apache-2.0
Downloads
152
Owner
Oui oui