Dell-Networking.dellos-copy-config

Copy-config role

This role is used to push the backup running configuration into a Dell EMC Networking device, and merges the configuration in the template file with the running configuration of the device.

The copy-config role requires an SSH connection for connectivity to a Dell EMC Networking device. You can use any of the built-in OS connection variables .

Installation

ansible-galaxy install Dell-Networking.dellos-copy-config

Role variables

  • No predefined variables are part of this role
  • Use host_vars or group_vars as part of the template file
  • Configuration file is host-specific
  • Copy the host-specific configuration to the respective file under the template directory in .j2 format
  • Variables and values are case-sensitive

Connection variables

Ansible Dell EMC Networking roles require connection information to establish communication with the nodes in your inventory. This information can exist in the Ansible group_vars or host_vars directories, or in the playbook itself.

Key Required Choices Description
ansible_host yes Specifies the hostname or address for connecting to the remote device over the specified transport
ansible_port no Specifies the port used to build the connection to the remote device; if value is unspecified, the ANSIBLE_REMOTE_PORT option is used; it defaults to 22
ansible_ssh_user no Specifies the username that authenticates the CLI login for the connection to the remote device; if value is unspecified, the ANSIBLE_REMOTE_USER environment variable value is used
ansible_ssh_pass no Specifies the password that authenticates the connection to the remote device
ansible_become no yes, no* Instructs the module to enter privileged mode on the remote device before sending any commands; if value is unspecified, the ANSIBLE_BECOME environment variable value is used, and the device attempts to execute all commands in non-privileged mode
ansible_become_method no enable, sudo* Instructs the module to allow the become method to be specified for handling privilege escalation; if value is unspecified, the ANSIBLE_BECOME_METHOD environment variable value is used
ansible_become_pass no Specifies the password to use if required to enter privileged mode on the remote device; if ansible_become is set to no this key is not applicable
ansible_network_os yes dellos6/dellos9/dellos10, null* Loads the correct terminal and cliconf plugins to communicate with the remote device

NOTE: Asterisk (*) denotes the default value if none is specified.

Dependencies

The dellos-copy-config role is built on modules included in the core Ansible code. These modules were added in Ansible version 2.2.0.

Example playbook

This example uses the dellos.dellos-copy-config role to push the configuration file into the device. It creates a hosts file with the switch details and corresponding variables. It writes a simple playbook that only references the dellos-copy-config role. By including the role, you automatically get access to all of the tasks to push configuration file.

Sample hosts file

leaf1 ansible_host= <ip_address> 

Sample host_vars/leaf1

hostname: leaf1
ansible_become: yes
ansible_become_method: xxxxx
ansible_become_pass: xxxxx
ansible_ssh_user: xxxxx
ansible_ssh_pass: xxxxx
ansible_network_os: dellos9

# This variable shall be applied in the below jinja template for each host by defining here
dellos_bgp
   asn: 64801

Sample roles/Dell-Networking.dellos-copy-config/templates/leaf1.j2

! Leaf1 BGP profile on Dell OS10 switch
snmp-server community public ro
hash-algorithm ecmp crc
!
interface ethernet1/1/1:1
 no switchport
 ip address 100.1.1.2/24
 ipv6 address 2001:100:1:1::2/64
 mtu 9216
 no shutdown
!
interface ethernet1/1/9:1
 no switchport
 ip address 100.2.1.2/24
 ipv6 address 2001:100:2:1::2/64
 mtu 9216
 no shutdown
!
router bgp {{ dellos_bgp.asn }}
 bestpath as-path multipath-relax
 bestpath med missing-as-worst
 router-id 100.0.2.1
 !
 address-family ipv4 unicast
 !
 address-family ipv6 unicast
 !
 neighbor 100.1.1.1
  remote-as 64901
  no shutdown
 !
 neighbor 100.2.1.1
  remote-as 64901
  no shutdown
 !
 neighbor 2001:100:1:1::1
  remote-as 64901
  no shutdown
  !
  address-family ipv4 unicast
   no activate
   exit
  !
  address-family ipv6 unicast
   activate
   exit
 !
 neighbor 2001:100:2:1::1
  remote-as 64901
  no shutdown
  !
  address-family ipv4 unicast
   no activate
   exit
  !
  address-family ipv6 unicast
   activate
   exit
 !

Simple playbook to setup to push configuration file into device - leaf.yaml

- hosts: leaf1
  roles:
     - Dell-Networking.dellos-copy-config

Run

ansible-playbook -i hosts leaf.yaml

(c) 2017 Dell Inc. or its subsidiaries. All Rights Reserved.

About

This role shall be used to push the backup running configuration into the device. This role shall merge the configuration in the template file with the running configuration of the device

Install
ansible-galaxy install Dell-Networking.dellos-copy-config
GitHub repository
License
apache-2.0
Downloads
3.3k