Dell-Networking.dellos-vrf

VRF role

This role facilitates to configure the basics of virtual routing and forwarding (VRF) that helps in the partition of physical routers to multiple virtual routers. This role is abstracted for dellos9 and dellos10 device.

The vrf role requires an SSH connection for connectivity to a Dell EMC Networking device. You can use any of the built-in OS connection variables .

Installation

ansible-galaxy install Dell-Networking.dellos-vrf

Role variables

  • Role is abstracted using the variable ansible_network_os that can take the dellos9 and dellos10 values
  • If dellos_cfg_generate is set to true, the variable generates the role configuration commands in a file
  • Any role variable with a corresponding state variable set to absent negates the configuration of that variable
  • Setting an empty value for any variable negates the corresponding configuration.
  • Variables and values are case-sensitive

dellos_vrf keys

Key Type Description Support
vrfdetails list Configures the list of VRF instances (see instances.*) dellos9, dellos10
vrfdetails.vrf_name string Specifies the VRF instance name (default is management) dellos9, dellos10
vrfdetails.vrf_id integer (required) Configures the VRF ID for the corresponding vrf dellos9
vrfdetails.description string Configures a one line description for the VRF dellos9
vrfdetails.state string Deletes the VRF instance name if set to absent dellos9, dellos10
vrfdetails.ip_route_import string VRF IP config subcommands dellos10
ip_route_import.community_value string RT community value dellos10
ip_route_import.state string Delete the IP config if set to absent dellos10
vrfdetails.ip_route_export string VRF IP config subcommands dellos10
ip_route_export.community_value string RT community value dellos10
ip_route_export.state string Delete the IP config if set to absent dellos10
vrfdetails.ipv6_route_import string VRF IPv6 config subcommands dellos10
ipv6_route_import.community_value string RT community value dellos10
ipv6_route_import.state string Delete the IP config if set to absent dellos10
vrfdetails.ipv6_route_export string VRF IPv6 config subcommands dellos10
ipv6_route_import.community_value string RT community value dellos10
ipv6_route_import.state string Delete the IP config if set to absent dellos10
vrfdetails.map_ip_interface list Specifies list of valid interface names dellos10
map_ip_interface.intf_id string Specifies valid interface name dellos10
map_ip_interface.state string Deletes VRF association in the interface if set to absent dellos10
upd_src_ip_loopback_id string Configure source ip for any leaked route in VRF from the provided loopback id, delete if empty string dellos10
vrfdetails.tagged_portname list Specifies list of valid interface names dellos9
tagged_portname.port string Specifies valid interface name dellos9
tagged_portname.state string Deletes VRF association in the interface if set to absent dellos9

NOTE: Asterisk (*) denotes the default value if none is specified.

Connection variables

Ansible Dell EMC Networking roles require connection information to establish communication with the nodes in your inventory. This information can exist in the Ansible group_vars or host_vars directories, or inventory or in the playbook itself.

Key Required Choices Description
ansible_host yes Specifies the hostname or address for connecting to the remote device over the specified transport
ansible_port no Specifies the port used to build the connection to the remote device; if value is unspecified, the ANSIBLE_REMOTE_PORT option is used; it defaults to 22
ansible_ssh_user no Specifies the username that authenticates the CLI login for the connection to the remote device; if value is unspecified, the ANSIBLE_REMOTE_USER environment variable value is used
ansible_ssh_pass no Specifies the password that authenticates the connection to the remote device.
ansible_become no yes, no* Instructs the module to enter privileged mode on the remote device before sending any commands; if value is unspecified, the ANSIBLE_BECOME environment variable value is used, and the device attempts to execute all commands in non-privileged mode
ansible_become_method no enable, sudo* Instructs the module to allow the become method to be specified for handling privilege escalation; if value is unspecified, the ANSIBLE_BECOME_METHOD environment variable value is used.
ansible_become_pass no Specifies the password to use if required to enter privileged mode on the remote device; if ansible_become is set to no this key is not applicable.
ansible_network_os yes dellos6/dellos9/dellos10, null* This value is used to load the correct terminal and cliconf plugins to communicate with the remote device.

NOTE: Asterisk (*) denotes the default value if none is specified.

Dependencies

The dellos-vrf role is built on modules included in the core Ansible code. These modules were added in ansible version 2.2.0

Example playbook

This example uses the dellos-vrf role to setup a VRF and associate it to an interface. It creates a hosts file with the switch details and corresponding variables. The hosts file should define the ansible_network_os variable with corresponding Dell EMC networking OS name.

When dellos_cfg_generate is set to true, the variable generates the configuration commands as a .part file in build_dir path. By default, the variable is set to false. It writes a simple playbook that references the dellos-vrf role.

upd_src_ip_loopback_id has an dependency with association of the interface in a VRF. So the dellos_vrf role needs to be invoked twice with different input dictionary one for the create and one for upd_src_ip_loopback_id, refer the example playbook for more details.

Sample hosts file

leaf1 ansible_host= <ip_address> 

**Sample host_vars/leaf1 for dellos10 device

hostname: leaf1
ansible_become: yes
ansible_become_method: xxxxx
ansible_become_pass: xxxxx
ansible_ssh_user: xxxxx
ansible_ssh_pass: xxxxx
ansible_network_os: dellos10
build_dir: ../temp/dellos10
dellos_vrf:
    vrfdetails:
      - vrf_name: "dellos10vrf" 
        state: "present"
        ip_route_import:
          community_value: "10:20"
          state: "present"
        ip_route_export:
          community_value: "30:40"
          state: "present"
        ipv6_route_import:
          community_value: "40:50"
          state: "absent"
        ipv6_route_export:
          community_value: "60:70"
          state: "absent"
        map_ip_interface:
         - intf_id : "loopback11"
           state   : "present"

dellos_vrf_upd_src_loopback:
    vrfdetails:
      - vrf_name: "dellos10vrf"
        state: "present"
        upd_src_ip_loopback_id: 11

Simple playbook to setup system - leaf.yaml

- hosts: leaf1
  roles:
     - Dell-Networking.dellos-vrf

Simple playbook to setup dellos10 with upd_src_ip_loopback_id - leaf.yaml

- hosts: leaf1
  roles:
     - Dell-Networking.dellos-vrf
- hosts: leaf1
  vars:
     dellos_vrf: "{{ dellos_vrf_upd_src_loopback }}"
  roles:
     - Dell-Networking.dellos-vrf

Run

ansible-playbook -i hosts leaf.yaml

(c) 2017-2019 Dell Inc. or its subsidiaries. All Rights Reserved.

About

The dellos-vrf role facilitates the configuration of VRF attributes in devices running Dell EMC Networking Operating Systems.

Install
ansible-galaxy install Dell-Networking.dellos-vrf
GitHub repository
License
apache-2.0
Downloads
3k