eos-route-control
Route Control Role for EOS
The arista.eos-route-control role creates an abstraction for common EOS routing policy configuration. This means that you do not need to write any ansible tasks. Simply create an object that matches the requirements below and this role will ingest that object and perform the necessary configuration.
This role is used to configure Route-maps and static IPv4 routes.
Installation
ansible-galaxy install arista.eos-route-control
Requirements
Requires an SSH connection for connectivity to your Arista device. You can use
any of the built-in eos connection variables, or the convenience provider
dictionary.
Role Variables
The tasks in this role are driven by the routemaps
and
ipv4_static_routes
objects described below:
routemaps (list) each entry contains the following keys:
Key | Type | Notes |
---|---|---|
name | string (required) | The name of the routemap to manage. |
action | choices: permit, deny (required) | The action associated with the routemap name. |
seqno | int (required) | The sequence number of the rule that this entry corresponds to. |
description | string | The description for this routemap entry. |
match | list | The list of match statements that define the routemap entry. The match statements should be a list of match statements without the word 'match' at the beginning of the string. |
set | list | The list of set statements that define the routemap entry. The set statements should be a list of set statements without the word 'set' at the beginning of the string. |
continue | int | The statement defines the next routemap clause to evaluate. |
state | choices: present*, absent | Set the state for the routemap configuration. |
ipv4_static_routes (list) each entry contains the following keys:
Key | Type | Notes |
---|---|---|
ip_dest | string (required) | Destination IP address or network. |
next_hop | string (required) | The next hop associated with the route. |
next_hop_ip | string | IP address of the next router. Only valid when next_hop is an egress interface |
distance | int | Distance designated for this route. Defaults to 1 if state is 'present'. |
tag | int | Tag assigned for the route. Defaults to 0 if state is 'present'. |
route_name | string | Descriptive name for the route |
state | choices: present*, absent | Set the state for the route configuration. |
Note: Asterisk (*) denotes the default value if none specified
Configuration Variables
Key | Choices | Description |
---|---|---|
eos_save_running_config | true*, false | Specifies whether to write any changes to the running-config resulting from the role execution to memory, copying the configuration to the startup-config. |
Note: Asterisk (*) denotes the default value if none specified
Connection Variables
Ansible EOS roles require the following connection information to establish communication with the nodes in your inventory. This information can exist in the Ansible group_vars or host_vars directories, or in the playbook itself.
Key | Required | Choices | Description |
---|---|---|---|
host | yes | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | |
port | no | Specifies the port to use when building the connection to the remote device. This value applies to either acceptable value of transport. The port value will default to the appropriate transport common port if none is provided in the task (cli=22, http=80, https=443). | |
username | no | Configures the usename to use to authenticate the connection to the remote device. The value of username is used to authenticate either the CLI login or the eAPI authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | |
password | no | Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either acceptable value of transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | |
ssh_keyfile | no | Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used when transport=cli. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | |
authorize | no | yes, no* | Instructs the module to enter priviledged mode on the remote device before sending any commands. If not specified, the device will attempt to excecute all commands in non-priviledged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead. |
auth_pass | no | Specifies the password to use if required to enter privileged mode on the remote device. If authorize=no, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead. | |
transport | yes | cli*, eapi | Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or eapi. |
use_ssl | no | yes*, no | Configures the transport to use SSL if set to true only when transport=eapi. If transport=cli, this value is ignored. |
provider | no | Convience method that allows all the above connection arguments to be passed as a dict object. All constraints (required, choices, etc) must be met either by individual arguments or values in this dict. |
Note: Asterisk (*) denotes the default value if none specified
Ansible Variables
Key | Choices | Description |
---|---|---|
no_log | true, false* | Prevents module arguments and output from being logged during the playbook execution. By default, no_log is set to true for tasks that gather and save EOS configuration information to reduce output size. Set to true to prevent all output other than task results. |
Note: Asterisk (*) denotes the default value if none specified
Dependencies
The eos-route-control role is built on modules included in the core Ansible code. These modules were added in ansible version 2.1
- Ansible 2.1.0
Example Playbook
The following example will use the arista.eos-route-control role to configure
a route-map and a static route. We'll create a hosts
file with our switch,
then a corresponding host_vars
file and then a simple playbook which only
references the eos-route-control role.
By including the role, we automatically get access to all of the tasks
to configure these EOS features. What's nice about this is that if you have a
host without any corresponding configuration, the tasks will be skipped
without any issue.
Sample hosts file:
[leafs]
leaf1.example.com
Sample host_vars/leaf1.example.com
provider:
host: "{{ inventory_hostname }}"
username: admin
password: admin
use_ssl: no
authorize: yes
transport: cli
routemaps:
- name: RM-1
action: permit
seqno: 10
description: My wonderful routemap
match:
- as 1000
- source-protocol bgp
continue: 20
- name: RM-1
action: permit
seqno: 20
description: My wonderful routemap
set:
- distance 50
- tag 100
ipv4_static_routes:
- ip_dest: 0.0.0.0/0
next_hop: Management1
next_hop_ip: 172.16.130.2
route_name: Default
tag: 100
A simple playbook, leaf.yml
- hosts: leafs
roles:
- arista.eos-route-control
Then run with:
ansible-playbook -i hosts leaf.yml
Developer Information
Development contributions are welcome. Please see Arista Roles for Ansible - Development Guidelines (test/arista-ansible-role-test/README) for additional information, including how to develop and run test cases for role development.
License
Copyright (c) 2015, Arista Networks EOS+ All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Arista nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Author Information
Please raise any issues using our GitHub repo or email us at ansible-dev@arista.com
Role for managing EOS Routemaps and IPv4 static routing configuration
ansible-galaxy install arista-eosplus/ansible-eos-route-control